기능성 유기재료 합성 연구실 > 개별연구실

본문 바로가기
사이트 내 전체검색

개별연구실

HOME 연구시설 개별연구실

기능성 유기재료 합성 연구실

Laboratory for Functional Organic Material Synthesis

교수명

  • 박혜정 교수

보유 장비

장비 이미지
No. 1
UV-Vis spectrophotometer UV-2600i, Shimadzu

설치위치
  • Room 113, Building 32 (Natural Sciences Hall 2)
장비스펙
  • Spectral bandwidth: 0.1, 0.2, 0.5, 1, 2, 5 nm
  • Wavelength range: 180 to 900 nm / setting: 0.1 increments / repeatability: ±0.01nm
장비소개
  • Measurement of absorption spectra in the UV-vis region
활용분야
  • Evaluation of material’s light absorption properties in the UV-vis region
장비 이미지
No. 2
Spectrofluorometer RF-6000, Shimadzu

설치위치
  • Room 113, Building 32 (Natural Sciences Hall 2)
장비스펙
  • Light source: 150W Xenon lamp / Scanning wavelength range: 200 to 900 nm / Resolution: 1.0 nm or less (Emission)
장비소개
  • Measurement of materials\' photophysical properties, including emission spectra in the visible light region.
활용분야
  • Evaluation of luminescence properties
장비 이미지
No. 3
FT-IR IrXross, Shimadzu

설치위치
  • Room 113, Building 32 (Natural Sciences Hall 2)
장비스펙
  • S/N: 55,000:1 / Resolution: 0.25, 0.5, 1, 2, 4, 8, 16 cm-1 / Wavenumber range: 7800 to 350 cm-1 / KBr window
장비소개
  • Measurement of molecular vibrational kinetic energy in the IR region
활용분야
  • Identification and structural analysis of specific functional groups in organic materials.
장비 이미지
No. 4
Bi-Potentiostat, CHI700E

설치위치
  • Room 113, Building 32 (Natural Sciences Hall 2)
장비스펙
  • Potential range: ±10V / Current range: ±250mA / Potentiostat rise time: <1us / Compliance Voltage: ±13 V / Input impedance: 10^12 Ohm / Measured current range: ±10 pA to ±0.25 A in 12 ranges / Automatic re-zeroing / Cell control: purge, stir, knock (Built
  • CV, LSV, CA, CC, BE, OCPT, limited version of CV simulator
장비소개
  • Measurement of materials’ electrochemical properties
활용분야
  • Analysis of oxidation-reduction characteristics and electrochemical stability through current measurement in response to changes in electrode potential.
장비 이미지
No. 5
Centrifuge 5804, eppendorf

설치위치
  • Room 113, Building 32 (Natural Sciences Hall 2)
장비스펙
  • Rotor: FA-45-6-30, MAX 12,100 rpm, 50ml×6 hole / Adaptor for fixed-angle-rotor (15ml Falcon, 2pcs.) / non-refridgerated
장비소개
  • Separation based on density differences of sample components.
활용분야
  • Component separation using centrifugal force based on density differences; utilized for separation after nanomaterial synthesis.
장비 이미지
No. 6
Vacuum oven

설치위치
  • Room 113, Building 32 (Natural Sciences Hall 2)
장비스펙
  • Vacuum pressure: -1.0 bar to 0 bar, temperature range: 0°C to 200°C.
장비소개
  • Sample drying and solvent removal through reduced-pressure heat treatment.
활용분야
  • Drying (solvent removal) under low-temperature reduced-pressure conditions.
장비 이미지
No. 7
Rotary evaporator

설치위치
  • Room 113, Building 32 (Natural Sciences Hall 2)
장비스펙
  • Rotational speed: 20–280 rpm, water bath temperature: 20–95 °C.
장비소개
  • Concentration of samples by rotary evaporation of solvents under reduced pressure.
활용분야
  • Solvent removal and sample concentration under low-temperature reduced-pressure conditions, used for chemical experiment purification.
장비 이미지
No. 8
Microwave sonicator, EASY 30H, Elmasonic

설치위치
  • Room 113, Building 32 (Natural Sciences Hall 2)
장비스펙
  • Ultrasonic frequency 37 kHz / max. Tank capacity: 2.75 L (working volume: 1.9 L) / max. Set Temperature: 80 ℃
장비소개
  • Ultrasonic treatment for nanoparticle dispersion, emulsification, cell lysis, homogenization, particle size reduction, and various other applications.
활용분야
  • Nanoparticle dispersion, emulsification, cell lysis, homogenization, particle size reduction, and more.

[51140] 경남 창원시 의창구
창원대학로 20 국립창원대학교 BAC (구. 동백관(3호관)) 305호 G-램프사업단

© 창원대학교. All rights reserved.
G-LAMP NOTICE